一、產品介紹（Product introduction）
由許多圓環結繞而成，小環按徑向排列而組成的一個大扁球體，也類似于一個旋形單簧首尾相接繞成一個圓球體，根據外形其中又分帶A花環填料、不帶A花環填料，還有帶刺花環填料。
It is composed of many rings, and the small rings are arranged radially to form a large flat sphere, which is also similar to a spiral clarinet end to end and winding into a sphere, which is divided into A garland filler, no A garland filler, and barbed garland filler according to the shape.
該填料除具有一般的能量大，壓降低等優點外，還由于填料空隙處能有較高的持液量，可使塔內液體的停留時間較長，從而增加了氣液兩相的接觸時間，提高了填料的傳質效率。
In addition to the advantages of large energy and reduced pressure, the filler can also have a high holding capacity at the filler void, which can make the liquid in the tower stay longer, thereby increasing the contact time of the gas-liquid two phases and improving the mass transfer efficiency of the filler.
二、產品用途（Product Usage）
塑料花環填料的主要特點是填料的空隙率大，不易被堵塞，還有通量大、阻力小等優點，花環填料也稱梅花環填料是由許多圓環結繞而成。
The main feature of plastic garland filler is that the void rate of the filler is large, it is not easy to be blocked, and there are advantages such as large flux and small resistance, and the garland filler is also called plum blossom ring filler is made of many ring knots.
由于這種CPVC氯化聚氯乙烯花環填料干燥塔項目，CPVC泰勒花環的間隙處能有較高的滯液量，可使塔內液體停留時間較長，從而增加了氣液的接觸時間，提高了效率。
Due to this CPVC chlorinated POLYVINYL chloride wreath filler drying tower project, cpVC Taylor wreath can have a higher amount of hysteresis at the gap, which can make the liquid in the tower stay longer, thereby increasing the contact time of gas and liquid and improving efficiency.
三、適用范圍（Scope of application）
該填料除具有一般的能量大，壓降低等優點外，還由于填料空隙處能有較高的持液量，可使塔內液體的停留時間較長，從而增加了氣液兩相的接觸時間，提高了填料的傳質效率。
In addition to the advantages of large energy and reduced pressure, the filler can also have a high holding capacity at the filler void, which can make the liquid in the tower stay longer, thereby increasing the contact time of the gas-liquid two phases and improving the mass transfer efficiency of the filler.
使用PPVC、CPVC材質花環填料解決了陶瓷和常規塑料填料被氯堿、次氯酸鈉、氫氧化鈉腐蝕或氧化問題。
The use of PPVC, CPVC material garland filler solves the problem of ceramic and conventional plastic filler being corroded or oxidized by chlor-alkali, sodium hypochlorite, sodium hydroxide.
材質有聚丙烯（PP）、RPP(玻璃增強聚丙烯)、聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）、聚偏氟乙烯（PVDF）等各種塑料材質。
Materials include polypropylene (PP), RPP (glass reinforced polypropylene), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF) and other plastic materials.
四、技術指標（Technical specifications）
規格 | 比表面積m2／m3 | 空隙率 % | 堆積個數（只／m3） | 堆積重量(kg/m3) |
25x9x(1.5x2) | 195 | 0.82 | 170000 | 90 |
47x19x(3x3) | 195 | 0.88 | 32500 | 111 |
51x19x(3x3) | 190 | 0.89 | 25000 | 62.5 |
73x28x(3x4) | 127 | 0.89 | 8000 | 52 |
95x37x(3x6) | 94 | 0.90 | 3900 | 88 |
145x48x(3x6) | 65 | 0.95 | 1100 | 47 |
在線客服